Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 27)

Han
00
.
21
Terminations technology
Cage-clamp terminal
This termination method requires very little preparation of the
wire and no special tools, leading to a low installed cost and a
high degree of mechanical security.
● For all stranded and solid wires with a cross section 0.14 to
2.5 mm².
● Ease of termination. Conductor and screwdriver are in same
plane.
● No special preparation of stripped conductor.
● The larger the conductor the higher the clamping force.
● The termination is vibration-proof.
● Guaranteed constant low resistance connection of the cage-
clamp terminal.
● The cage-clamp system is internationally approved.
VDE, CSA, UL, ÖVE, SEMKO, LCIE (France), Germanischer
Lloyd, DET Norske Veritas
One conductor per termination Slot for screwdriver
Screwdriver width:3.0 x 0.5 mm
Inserts
max. wire gauge
Stripping
length
(mm²) AWG l (mm)
Han ® ES, Han ® Hv ES 0.14 ... 2.5 26 ... 14 7 ... 9
Han ® ESS 0.14 ... 2.5 26 ... 14 9 ... 11
Han ® K 4/4 0.14 ... 2.5 26 ... 14 7 ... 9
Han ® ES Modul 0.14 ... 2.5 26 ... 14 7 ... 9
IDC (Insulation displacement terminal)
Inserts max. wire gauge
(mm²) AWG
M8-S/M12-S 0.14 ... 0.34 26 ... 22
Circular connectors M12 angled 0.25 ... 0.50 24 (7/32) ... 22
Circular connectors M12-L 0.34 ... 0.75 22 ... 18
M12-L PROFIBUS
0.25 ... 0.34 24 ... 22
M12-L Ethernet 0.25 ... 0.34 24 ... 22
0.34 ... 0.5 22 ... 18
Panel feed through Pg 13.5 /M20 0.75 ... 1.50 18 ... 16
Panel feed through Pg 9 0.25 ... 0.50 24 (7/32) ... 22
HARAX
®
3 A 0.75 ... 1.5 18 ... 16