Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 450)

41
.
02
Han ® Thermocouple
Thermo-
couple
Features
• Connector for temperature measurement conduc-
tors - Suitable for injection moulding machines
• Iron and constantan contacts according to
DIN IEC 584 type J, screw and crimpterminals
• Mixed loading of thermocouple crimp contacts and
standard contacts within one insert possible
• Thermocouple crimp contacts can be combined
within Han-Modular ®
• According to EUROMAP 14, Part 1
Application
Overview of a heating circuit
Connector at an injection moulding machine
Technical characteristics
Specifications DIN EN 60 664-1
DIN EN 61 984
Inserts
Electrical data
acc. to EN 61 984
- Han A ® 16 A 250 V 4 kV 3
Rated current 16 A
Rated voltage 250 V
Rated impulse voltage 4 kV
Pollution degree 3
- Han E ® crimp 16 A 500 V 6 kV 3
- Han E ® screw 16 A 400 V 6 kV 3
- Han ® Q 16 A 230/400 V 4 kV 3
- Han D ® 10 A 50 V 4 kV 3
- Han DD ® 10 A 250 V 4 kV 3
Insulation resistance ≥ 10 10 Ω
Material polycarbonate
Limiting temperatures -40 °C ... +125 °C
Mechanical working life
- mating cycles ≥ 500
Flammability acc. to UL 94 V 0
Contacts
Material constantan
Identification acc. to
IEC 584 type J
Surface not coated
Contact resistance ≤ 1 mΩ
Crimp terminal Han E ® 0.14 ... 0.5 mm²
AWG 24 ... 20
Crimp terminal Han D ® 0.14 ... 0.37 mm²
AWG 24 ... 22
Screw terminal 1 ... 2.5 mm²
AWG 17 ... 14
- Tightening/test torque 0.5 Nm
Material iron
Identification acc. to
IEC 584 type J
Surface gold
Contact resistance ≤ 1 mΩ
Crimp terminal Han E ® 0.14 ... 0.5 mm²
AWG 24 ... 20
Crimp terminal Han D ® 0.14 ... 0.37 mm²
AWG 24 ... 22
Screw terminal 1 ... 2.5 mm²
AWG 17 ... 14
- Tightening/test torque 0.5 Nm
Hoods/Housings (see chapter 31)
Material Hoods/Housings aluminium die-cast
Surface powder-coated, grey
Locking Stainless steel
Hoods/Housings sealing NBR
Limiting temperatures -40 °C ... +125 °C
Degree of protection
acc. to DIN 40 050 IP 65