Northern Connectors Harting HAN Industrial Rectangular Connectors - Manual (Page 275)

15
.
10
Power
Distribution
Features Advantages
Han-Power ® S with functional LED Display and on/off Switch
Assembly details
Specifications DIN EN 61 984
DIN EN 60 664-1
IEC 61 439-2
Han-Power ® S
Number of contacts
- Power contacts 4 + PE
Power side
Electrical data
acc. to EN 61 984
Interface to connector 10 A 230/400 V 4 kV 3
Rated current 10 A
Rated voltage conductor - ground 230 V
Rated voltage conductor - conductor 400 V
Rated impulse voltage 4 kV
Rated short-circuit current 0.5 kA
Pollution degree 3
Frequency 50 Hz
Energy bus 50 A 230/400 V 4 kV 3
Max. operating temperature -5°C … 60°C
Degree of protection
acc. to DIN EN 60 529 IP 65
Mechanical working life ≥ 500 mating cycles
Security fixing
nach IEC 60 127-1;
nach UL 4248-1 / UL 512
nach CSA C22.2 no. 39
Rated current
Ina
10 A
Rated voltage
Un
250 V
Technical data of switches
Electrical data
acc. to IEC/EN 60 947 16 A 750 V 0.5 kA
Rated current
Ina
16 A
Rated voltage
Un
750 V
Rated short-circuit current
Icc
0.5 kA
Mechanical working life 10 000 operations
➀ Energy supply Wire gauge: 10 mm²
Ambient temperature °C
Operating
current
A
The current carrying capacity of the connectors is limited by the
thermal load capability of the contact element material including
the connections and the insulating parts. The derating curve
is therefore valid for currents which flow constantly (non-inter-
mittent) through each contact element of the connector evenly,
without exceeding the allowed maximum temperature.
Measuring and testing techniques according to DIN EN 60 512-5.
The Han-Power ® S connector is suitable for the assembly of
serial power bus. Having assembled the energy supply
Han-Power ® S can be inserted at any place along the power
cable. The cable jacket has to be removed, the conductor is
placed without interruption in the IDC.
Han-Power ® S is suitable for cables with single strands
manufactured acc. to DIN VDE 0281/ DIN EN 60 228 with wire
gauges of 10.0 mm². For the distribution of the device Han-Com-
pact ® cable to cable hoods are used.
This power supply can be used with Han-Compact ® hood.
Current carrying capacity
Technical characteristics
• 4 IDC‘s + PE for 10 mm² wires
• Energy supply can be switched off
• Lockable switch in null position
• 3 fuses for energy supply 5.3 x 20 mm.
Not included with product.
• No interruption of energy supply
• Space-saving and compact design
• Functional LED display