Kinze Ag Leader Integra - Manual (Page 39)

23
S
ETUP
C
ONFIGURATION
A
DVANCED TAB
Press: Home button > Setup (wrench) button > Display button > Advanced tab
The Advanced Tab allows you to specify settings for
copying log files; specify Key Switch Standby
settings; view and manually upgrade module
firmware; and create and restore backup files.
CAUTION: The Export Diagnostic Files, Advanced Parameters, Copy Debug Files, Clear Debug Files
and Service Mode functionality on the Advanced Tab is reserved for use by the manufacturer. DO NOT
change any of these settings without specific instruction from the manufacturer.
• Key Switch Standby
This setting allows the display to remain powered up after the vehicle power has been shut down. Instead,
the display will switch into standby mode and will appear to be shut off; however the power light will change
to an amber color. Pressing the touchscreen while it is in standby mode will immediately turn the screen
back on again.
Use / to specify a length of time that you wish the display to remain powered up in standby
mode after the vehicle power has been shut down.
Note: When the time you specified in Key Switch Standby is nearly expired, then the amber-colored power
light will flash on and off immediately preceding shutdown. If you wish the display to remain powered up for a
longer period of time, touch the display to restart the Key Switch Standby countdown.
• About button
Displays product licensing information and copyright information.
• Log Files
These settings allow you to copy your data in the display.
- Export by Grower Press of export log files by growers.
- Export Data Files. Press to copy all logged data in the display to the USB drive.
- Export Data Files on Shutdown. Checking this checkbox will copy all log files to the USB drive when
the display is powering down.
- See “Export Files” on page 74 for more information.
• Memory
Adjusts information stored in the display’s internal memory.
Advanced
Display Features Advanced
Console Setup
General
Log Files Key Switch Standby
5
About
Memory Guidance
(minutes)
Export by Grower
Export data files
on shutdown
Export
Diagnostic Files
Restore
Backup
Create
Backup
Export All
Log Files
Advanced
Parameters
Copy
Debug Files
Clear
Debug Files
Clear Internal
Memory
Remove
Patterns
Memory
Test
Service
Mode
View Module
Firmware