Kinze 3000 Rigid Frame Planter Rev. 5/14 - Manual

This manual applies to: Model: 3000 Pull Type Planters
Serial Number: 643579 and later
Record serial number of your planter and date purchased:
Serial Number ___________________________________
Date Purchased __________________________________
Information in this manual was current at time of printing. However, due to Kinze’s ongoing product improvement,
production changes may cause your machine to appear slightly different in detail. Kinze Manufacturing, Inc. reserves
the right to change specifications or design without notice and without incurring obligation to install the same on
machines previously manufactured.
Right hand (R.H.) and left hand (L.H.), as used throughout this manual, are determined by facing in the direction the
machine will travel when in use, unless otherwise stated.
Kinze ® , the Kinze ® logo, Double Frame ® and Interplant ® are registered trademarks of Kinze Manufacturing, Inc.
MODEL 3000
RIGID FRAME PLANTER
(Mechanical Seed Metering)
PARTS MANUAL
M0188-02 Rev. 5/14
Hardware Size / Tool Required
1/4 " = 7/16" 7/16 " = 5/8"
(nut for 7/16" hardware uses 11/16" tool)
3/4 " = 11/8" 11/4" = 17/8"
5/16 " = 1/2" 1/2 " = 3/4" 7/8 " = 15/16" 11/2" = 21/4"
3/8 " = 9/16" 5/8 " = 15/16" 1" = 11/2"