Kinze Grain Carts Rev. 4/14 User Manual
Parts manual, Kinze grain carts
This manual applies to:
2012 Production and on
Record the model number and serial number of your planter along with date purchased:
Serial Number ___________________________________
Date Purchased __________________________________
Information in this manual was current at time of printing. However, due to Kinze’s ongoing product improvement,
production changes may cause your machine to appear slightly different in detail. Kinze Manufacturing, Inc. reserves
the right to change specifications or design without notice and without incurring obligation to install the same on
machines previously manufactured.
Right hand (R.H.) and left hand (L.H.), as used throughout this manual, are determined by facing in the direction the
machine will travel when in use, unless otherwise stated.
KINZE GRAIN CARTS
PARTS MANUAL
(900/1100/1300/1500)
M0238-02
Rev. 4/14
Kinze
®
and the Kinze
®
logo are registered trademarks of Kinze Manufacturing, Inc.
Document Outline
- Table of Contents
- Drive Components
- Main Frame
- Clevis Hitch Assemblies
- Front Hitch
- Jack Assembly
- Grain Transfer
- Front Lower Housing
- Vertical Auger Assembly
- Lower Vertical Auger Assembly (2012 Production)
- Lower Vertical Auger Assembly (2013 Production and on)
- Lower Vertical Auger Sub Assembly (900) Prior to G1K570 Auger Spindle and Coupler Update Kit
- Lower Vertical Auger Sub Assembly (900) 2013 Production and On
- Lower Vertical Auger Sub Assembly (1100/1300/1500)
- Upper Vertical Auger Assembly
- Upper Vertical Auger Sub Assembly
- Upper Vertical Auger Discharge Hood
- Frame Assembly (900)
- Frame Assembly (1100/1300/1500 Flotation/Track)
- Frame Assembly (1100/1300 Row Crop)
- Lower Tank Assembly (900/1100)
- Lower Tank Assembly (1300)
- Lower Tank Assembly (1500)
- Lower Tank Sub Assembly (900)
- Lower Tank Sub Assembly (1100)
- Lower Tank Sub Assembly (1300/1500)
- Hydraulic Flow Gate (900)
- Hydraulic Flow Gate, Front Assembly (900)
- Hydraulic Flow Gate, Rear Assembly (900)
- Hydraulic Flow Gate (1100)
- Hydraulic Flow Gate, Front Assembly (1100)
- Hydraulic Flow Gate, Rear Assembly (1100)
- Hydraulic Flow Gate (1300)
- Hydraulic Flow Gate, Front Assembly (1300)
- Hydraulic Flow Gate, Rear Assembly (1300)
- Hydraulic Flow Gate (1500)
- Hydraulic Flow Gate, Front Assembly (1500)
- Hydraulic Flow Gate, Rear Assembly (1500)
- Lower Tank Supports (900)
- Lower Tank Supports (1100/1300/1500)
- Cross Brace Assemblies (2012 Production)
- Cross Brace Assemblies (2013 Production)
- Cross Brace Assemblies (2014 Production and on)
- Safety Screens (900)
- Safety Screens (1100/1300/1500) (2013 Production)
- Safety Screens (2014 Production and on)
- Upper Tank Assembly
- Upper Tank Side Panels and Bracing (900)
- Upper Tank Side Panels and Bracing (1100/1300/1500)
- Roll Tarp
- Electric Roll Tarp (2012 Production)
- Electric Roll Tarp (2013 Production and on)
- Electric Roll Tarp Miscellaneous
- Flotation Axle (900)
- Flotation Axle (1100)
- Flotation Axle (1300)
- Row Crop Axle (1100/1300)
- Track Axle
- 36" Track Assembly
- Track End Wheel
- Track Mid Wheel
- Hub Assembly (900/1100 Flotation)
- Hub Assembly (1300 Flotation)
- Hub Assembly (Row Crop Without Electronic Scale Package)
- Tire Assemblies (Flotation)
- Tire Assemblies (Row Crop)
- Hydraulics
- Hydraulic Schematic
- Hydraulic Tractor Control Schematic
- Hydraulic Flow Gate Cylinder
- Auger Discharge Hood Cylinder
- Auger Rotate Cylinder
- Vertical Auger Cylinder
- Horizontal Auger Drive (Idler) Cylinder
- Counterbalance Valve Block
- Rotate Valve Block Assembly (2012 Production)
- Rotate Valve Block Assembly (2013 Production and On)
- Spout Manifold Block Assembly
- Floor Auger Manifold Block Assembly
- Auger Rotate Manifold Block Assembly
- Electrical
- Miscellaneous
- Numerical Index