Kinze Ag Leader Integra - Manual (Page 149)

133
G
UIDANCE
Shift moves all of the swaths by a specified distance
to the left or right, (including the AB line). The swaths
can be shifted by a distance or number of rows.
• Shift by Distance - enter the distance that you
wish to shift the pattern. Use the Shift Left and Shift
Right buttons to enter the direction and to accept
change
• Shift by Rows - enter the number of rows you wish
to shift the pattern. Use the Shift Left and Shift Right
buttons to enter the direction and to accept change
Note: The Shift setting is not available with the SmartPath patterns.
S
TEERING
Press: Map button > Guidance tab (in Mapping Toolbox) > Setup (wrench) button > Steering tab
Line Acquisition — determines how aggressively
the system steers onto the desired steering path.
The ideal setting allows the system to take the
shortest route without excessively sharp or sudden
movements of the vehicle.
Steering Response — controls the oscillations of
the vehicle when it is on the desired path.
Reverse Response — (ParaDyme Only) controls
the oscillations of the vehicle when it is on the
desired path in reverse.
Log coverage while AutoSteer is engaged checkbox
Coverage while engaged is available when an AutoSteering system (OnTrac2+, GeoSteer, ParaDyme)
is connected. User can still manually control coverage logging with the on-screen coverage button.
AutoSwath is unaffected by this selection.
O
N
T
RAC
T
UNING
Press: Map button > Guidance tab (in Mapping Toolbox) > Setup (wrench) button > OnTrac Tuning tab
Nudge Adaptive Curve Shift Lightbar
Save
Pause
Shift Left
Guidance Options
Save
Group
0
Feet Shift By Inches
0 Distance
Shift Right
Remark A
Steering
Nudge Tramlines Shift Lightbar
Guidance Options
Line
Acquisition
Steering
Steering
Responce
Reverse
Responce
Log coverage while Autosteer is engaged
10 10 10
Save
Pause
Save
Group
Remark A
OnTrac Tuning