Kinze Ag Leader Integra User Manual

Page 106

Firmware Version 5.2

Once a Virtual Terminal has been enabled

will appear in the task bar. Toggle between the
Virtual Terminal run screen and other display
functions by pressing the VT button.

• Broadcast GPS Speed
Checking this box allows the implement to use GPS
ground speed that has been gathered by the display.

• Auxiliary Module Support

Assign implement functions to ISO compatible inputs.

• Virtual Terminal Functional Instance

Always set to 0 except when there are multiple VTs on the ISO Bus. Use

to change instance.

Reboot Display

• Task Controller Function Instance

Always set to 0 except when there are multiple TCs on the ISO Bus. Use

to change instance.

Reboot Display

When an ISOBUS compliant implement
is connected to the display for the first
time, the implement WSM sends its
graphic interface, called the Object Pool,
to the display. Status bar (A) appears
while Object Pools are being loaded. This
process might take several minutes
depending on the number of Object Pools
being loaded. Once loaded, object pools
are stored in the display memory.

Virtual Terminal

Enable Virtual Terminal

Broadcast GPS Speed

Auxiliary Module Support

Task Controller

Enable Task Controller

Function Instance

Note: Only Function Instance 0 allows
modifying auxiliary assingnments.

ISOBUS Settings