INFICON SQC-310 Thin Film Deposition Controller - Manual (Page 79)

4 - 3
IP
N 07
4-
55
0-
P1
B
SQC-310 Operating Manual
4.5 Half Rack Adapter Installation
The optional Half Rack Adapter kit (PN 782-900-016) mounts two SQC-310
instruments side by side in a standard 19 in. rack.
The Half Rack Adapter kit consists of two standard rack mount ears and an adapter
bracket. Attach one of the standard rack mount ears to each SQC-310 with the
10-32 flat head screws supplied. Connect the two SQC-310 instruments together
by place them side by side and installing the adapter bracket to their back panels
using the existing screw holes. You will need to remove one screw from each back
panel to make these holes available. Attach the assembly to the 19 in. rack using
two screws on each side (not included).
4.6 Full Rack Extender Installation
The Full Rack Extender option (PN 782-900-007) mounts an SQC-310 into a full
width 19 in. rack space.
Assemble the two 3 in. x 5 in. Extender Kit side panels and the larger front and rear
panels into a box configuration using the eight 6-32 flat-head screws.
Figure 4-2 Attaching the Extender
Thread two 10-32 shoulder screws from the inside of one of the box sides until the
threads extend fully to the outside. Now attach the Extender Kit to the SQC-310 by
threading the shoulder screws into the matching holes in the SQC-310 covers.