Apple ColorLaserWriter 12/600PS - Manual (Page 67)

42 Chapter 1
How to return to the default settings
To return to the factory default settings, move the configuration switch to the
left-hand position and restart the printer. Choose Restart Printer from the
Utilities menu (in the Apple Printer Utility) or turn the printer off and on.
Finally, be sure to return the switch to the right-hand position.
What to do next
Finish preparing the printer and completing the network connections by
reading one or more of the following chapters:
m Chapter 2 explains how to administer the printer on an
AppleTalk network
and how to help Macintosh users start using the printer.
m Chapter 3 explains how to administer the printer on an
Ethernet network and
how to help Windows and NetWare users get started using the printer. It also
explains how to set up a direct connection to an IBM PC or compatible
computer.
m Chapter 4 explains how to set up the printer on a
TCP/IP network and how to
help UNIX users get started using the printer.