Apple ColorLaserWriter 12/600PS - Manual (Page 218)

Using a hard disk
You can add an internal or external hard disk to the Color LaserWriter 12/600
PS. A hard disk can store many soft fonts so they don’t need to be downloaded
each time you use them, thus expediting your printing. Chapter 5 explains
how to install a hard disk.
After the hard disk is installed, you must add it to the device list and initialize
it, as explained in the next two sections.
Adding a hard disk to the device list
1 From the Program Manager, open the Control Panel.
2 Double-click the Printers icon.
The Printers dialog box appears.
3 If it is not already selected, select the Color LaserWriter 12/600 PS from the Installed
Printers list.
4 Click Setup.
The Setup dialog box appears.
Note: You can also open the Setup dialog box from within many Windows
programs. Check your program documentation to see if you can change your
printer setup from within your program.
5 Click Fonts.
6 Click Font Downloader.
The Font Downloader dialog box appears.
7 Click Device Installer.
A dialog box opens.
193 Windows and DOS Users