Apple ColorLaserWriter 12/600PS - Manual (Page 151)

4 To add a remote queue, choose the following items from the SMIT menu:
Spooler (Print Jobs and Printers)
Manage Remote Printer Subsystem
Client Services
Remote Printer Queues
Add a Remote Queue
A form appears for you to define a remote printer.
5 Enter information into the remote printer form, as follows:
m
Name of queue to add Type the local queue name users will use as the name
for the printer.
m
Designation host for remote jobs Type the printer IP name assigned to the
printer as described in “Step 3: Assigning an IP Address to the Printer,”
earlier in this chapter.
m
Name of queue on remote printer Type the local queue name users will use as
the name for the printer
m
Name of device to add Type any name, up to 7 characters. The name is
required but has no effect on the print service.
6 To start the lpd subsystem, choose the following items from the SMIT menu:
Spooler (Print Jobs and Printers)
Manage Remote Printer Subsystem
Server Services
lpd Remote Printer Subsystem
Start Using the lpd Subsystem
Start BOTH Now and at System Restart
7 At the UNIX prompt, start the qdaemon by typing
startsrc -s qdaemon
8 Try printing by using this command:
lpr -P printer_queue_name filename
Note that there’s no space between -P and printer_queue_name.
126 Chapter 4