Apple ColorLaserWriter 12/600PS User Manual
Page 296
273
Setting up the Printer as an ATPS Remote Printer
6
Enter a line of configuration information for each Color LaserWriter 12/600 PS printer.
(Enclose the printer name and zone in quotation marks.)
Example
“Sales Printer:Ethernet Zone”
This example identifies the printer “Sales Printer” located in the zone
“Ethernet Zone.”
You can include a
-h
option at the end of the line to instruct ATPS to make
the printer unavailable for direct Macintosh printing; that is, the printer will
be accessible only through ATPS queues.
Example
“Sales Printer:Ethernet Zone” -h
Note: Other ATPS options are available for configuring the printer. See
Novell’s NetWare for Macintosh documentation for more information on these
options.
7
Press Esc to quit editing.
A prompt appears, asking if you want to save your changes.
8
Type
y
and press Enter.
The list of configuration files reappears.
9
Select the SYS:\SYSTEM\AUTOEXEC.NCF file and press Enter.
A window appears, displaying the file’s contents.
10
Insert the following line after the
load afp
statement:
load atps
This command instructs the NetWare server to automatically load the ATPS
service at startup time.
11
Press Esc to exit the editor, then type
y
and press Enter to confirm the changes.
12
Press Esc three times to exit the Install utility.
13
At the system console prompt, type
load atps
and press Enter.
The service is loaded and immediately becomes available to network users. A
message appears confirming the load, and the console displays its prompt.