Connecting directly to a single macintosh – Apple ColorLaserWriter 12/600PS User Manual
Page 59
Connecting directly to a single Macintosh
Use this method to connect a single Macintosh to the printer.
1
Obtain two LocalTalk Kits.
2
Plug one LocalTalk connector into the computer’s printer (
[
) port.
3
Plug one end of the cable into the LocalTalk connector on the computer.
4
Plug the second LocalTalk connector into the printer’s LocalTalk (
ˆ
) port.
5
Plug the other end of the cable into the LocalTalk connector on the printer.
Note: You can use Ethernet transceivers (instead of LocalTalk connectors) to
connect a Macintosh directly to the printer.
LocalTalk
port
Printer
port
ˆ
34
Chapter 1