Apple ColorLaserWriter 12/600PS - Manual (Page 149)

5 Select the following options, in order, from the SAM menu:
Printers and Plotters
Printers/Plotters
Actions
Add a Remote Printer ( Do not select “Add a Network Printer.”)
A form appears for you to define a remote printer.
6 Enter information into the remote printer form as follows:
m
Printer queue name Type the local queue name users will use as the name
for the printer.
m
Remote system name Type the IP name assigned to the printer as described
in “Step 3: Assigning an IP Address to the Printer,” earlier in this chapter.
m
Remote printer queue name Type the local queue name users will use as the
name for the printer.
m
Remote cancel model Used for remote printer job removal; type rcmodel
m
Remote status model Used for remote printer queue status; type rsmodel
m
Printer class Optional
m
Make this the system default printer? Check the box to make this printer the
default printer for all workstations on this segment of the network.
m
Allow anyone to cancel requests Check this box if anyone should be able to
cancel requests.
m
Remote printer on a BSD system? (y or n) Because this printer is a Berkeley-
style remote printer, check this box.
7 Select the OK button.
8 When you see the message “Task completed,” select OK.
9 Pull down the Lists menu and select Exit.
10 Select the Exit SAM button.
11 Test printing with the following command:
lp -d printer_queue_name filename
124 Chapter 4