Communication settings – Apple ColorLaserWriter 12/600PS User Manual
Page 289
Communication settings
The following table shows the default communication settings. For
information about using the configuration switch to adjust communications
settings, see “Adjusting Communication Settings” in Chapter 1. To change or
view the current communication settings, use the Apple Printer Utility on the
Macintosh (see Chapter 2 for details) or the Apple Printer Utility for
Windows on an IBM PC or compatible computer (see Chapter 3 for details).
Right switch position
These are the factory default settings:
Port
Mode
Data
Protocol
Parallel
On
AutoSelect
TBCP
Port
Interface
Mode
LocalTalk
LocalTalk
On
Ethernet
EtherTalk
On
Netware
On
Parallel
TCP/IP
On
266
Appendix A