Using the driver to print to a postscript file – Apple ColorLaserWriter 12/600PS User Manual
Page 222
Using the driver to print to a PostScript file
Using the driver to print to a PostScript file is a three-step process. First,
change your printer setup, then use your program to create the file, and finally
reset your printer setup for normal printing.
Step 1:
Changing your printer setup to print to a PostScript file
1
From the Program Manager, open the Control Panel and double-click the Printers icon.
The Printers dialog box appears.
2
If it is not already selected, select the name of the PostScript printer that you are using
from the Installed Printers list.
3
Select Connect.
The Connect dialog box appears.
4
Select FILE from the Ports list box.
You may have to scroll through the list to find this selection.
5
Choose OK to close the Connect dialog box and return to the Printers dialog box.
6
Choose Setup.
The driver Setup dialog box appears.
7
After changing (or confirming) your printer settings, choose OK to close the dialog box.
Note: Choose settings in the PostScript Options dialog box that will produce
a file that prints correctly on the destination printer. For example, select the
“Use PostScript Level 2 Features” option if you are sure that you will be
printing the file only on Level 2 printers, such as the Color LaserWriter
12/600 PS. If you plan to use a printer that does not support binary
communication, disable the “Send Data in Binary” option. Selecting the
“Optimize for Portability” option creates PostScript files that print
successfully from different programs on a wide variety of printers and
imaging devices; it is recommended that you enable this option.
8
Choose Close to close the Printers dialog box.
9
Choose Exit from the Settings menu to close the Control Panel.
Your computer is now set up to create PostScript files when you choose the
Print command from a Windows program.
197
Windows and DOS Users