Apple ColorLaserWriter 12/600PS - Manual (Page 117)

Step 2, option B: Setting up the printer as a remote printer
(RPRINTER mode)
To configure your printer as a remote printer, you must use PCONSOLE to
specify the print server that will provide service to your printer, create a print
queue (if necessary), and associate a print queue with the print server. You
must also use the Apple Printer Utility to set up the printer as a remote
printer.
IMPORTANT The procedures in this section are specific for a version of
PCONSOLE running under NetWare 4.02. If you are running PCONSOLE
under NetWare 4.1 or NetWare 3.x, the menus and commands will differ
slightly.
Specifying a print server
1 Log in to a file server from a DOS client PC.
IMPORTANT You must have supervisor or equivalent privileges to select a print
server.
2 At the DOS prompt, type PCONSOLE and press Enter.
The utility starts and the Available Options menu appears, displaying printer
console options.
Print Queues
Printers
Print Servers
Quick Setup
Change Context
3 Use the arrow keys to highlight Print Servers in the menu and press Enter.
If available, a list of available print servers appears.
4 Select a print server or, if the print server does not yet exist, press Ins, type the print
server name, and press Enter.
IMPORTANT The print server name you enter in PCONSOLE must match a
print server NLM, VAP, or a RPRINTER.EXE stored on a dedicated
computer.
92 Chapter 3