Apple ColorLaserWriter 12/600PS User Manual
Page 60
What to do after connecting to a single Macintosh
m If you wish to connect the printer to other networks, or to connect the
printer directly to an IBM PC or compatible computer, see the appropriate
sections later in this chapter.
m If you’re finished connecting the printer, skip to “Adjusting Communication
Settings,” later in this chapter.
See Chapter 2 for more information about setting up the printer on a
LocalTalk network or Appendix B for information about setting up the
printer on a Novell network running ATPS.
Connecting to an IBM PC or compatible with a parallel cable
1
Obtain a parallel interface cable like this one.
IMPORTANT
You must purchase this cable, part number M4235ZM/A,
designed for the parallel port on the Color LaserWriter 12/600 PS. If you try
to use any other cable, you may damage the printer’s parallel port.
25-pin
connector
Mini 25-pin
connector
35
Setting Up the Color LaserWriter 12/600 PS