Apple ColorLaserWriter 12/600PS - Manual (Page 224)

7 If you changed any printer settings to print to file, choose Setup to display the Setup
dialog box. Undo any changes you made and then choose OK.
The Printers dialog box appears.
8 Select OK to close the Printers dialog box.
9 Choose Exit from the Settings menu to close the Control Panel.
DOS notes
If you are using DOS programs, refer to the manual that came with your
program and follow the instructions for using a PostScript printer. Most DOS
programs are PostScript compatible.
Capturing a print queue for DOS printing
From DOS, you can use the NetWare CAPTURE command to map the
parallel port to a print queue.
m
Log in to the NetWare network and enter the CAPTURE Command, using the
following syntax:
CAPTURE /q= queue_name local= lptnumber server= server_name
job= new
Unless you specify otherwise, the command assumes that you are mapping
the LPT1 port to a queue.
Using the Apple Printer Utility for Windows
The Apple Printer Utility program supplied with the printer software lets the
printer administrator control various aspects of how the printer works. For
information about installing and using the Apple Printer Utility for Windows,
see Chapter 3.
199 Windows and DOS Users