Apple ColorLaserWriter 12/600PS - Manual (Page 297)

Modifying an existing ATPS configuration on a NetWare 3.x server
The procedure for modifying an existing ATPS configuration is similar to the
procedure for creating a new configuration. The primary difference is that
you are modifying an existing AUTOEXEC.NCF file instead of creating a
new one.
1 At the console prompt, type
load install
The Install utility starts, and a list of Installation Options appears.
2 Select Product Options from the list and press Enter.
A list of product options appears. If the Macintosh NLM is installed and
operating properly, a NW-MAC option will be available.
3 Select the NW-MAC option and press Enter.
A list of configuration files appears.
4 From the list, select the file SYS:\SYSTEM\ATPS.CFG and press Enter.
A prompt appears, asking if you want to create a new file.
5 Type y and press Enter.
An empty window appears, providing an area for entering configuration
information.
274 Appendix B