Apple ColorLaserWriter 12/600PS - Manual (Page 135)

Removing Type 1 fonts
1 In the ATM control panel, select the fonts to be removed.
2 Click Remove.
Changing the size of the ATM font cache
The size of the ATM font cache determines how much system memory is
available to store font information. The default setting is 256K. If you are
using many typefaces or sizes, you may want to increase the font cache size to
improve performance. To do this:
1 Open the ATM control panel.
2 Click the up arrow in the Font Cache box to increase the size, or click the down arrow to
decrease the size.
Turning ATM off or on
ATM is turned on automatically when installed. When it is on, your screen
display uses Type 1 fonts. When it is off, your display uses TrueType fonts.
However, Type 1 fonts print correctly whether or not ATM is on.
To turn ATM on or off, open the ATM control panel and select On or Off.
Then click Exit. Then restart Windows, as prompted, for the change to take
effect.
What to do next
The printer is now set up for Windows and DOS computers. If you want to
install any options, see Chapter 5. To learn how to print from Windows or
DOS computers, see Chapter 7. To set up the printer for UNIX users, see
Chapter 4.
110 Chapter 3