Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 80)

Remote Infrastructure Management System - Version 1.0 / July 2014
80 www.chatsworth.com
3.4.14 Internet Protocol
The Internet Protocol link allows users to change a variety of settings, including the RIM-1000 IP address, Default Router
and Net Mask.
Figure 3.29 IP Configuration Menu
Table 3.18 IP Configuration Options
Option Description
MAC Address
The MAC address is a unique identifier set by the manufacturer, and is
non-editable.
DHCP
DHCP allows the RIM-1000 to automatically obtain a valid IP address from a
server. If you choose to use DHCP, enable it here.
IP Address
The RIM-1000 is shipped with a default IP address of 10.0.0.188. Contact your IT
department for an appropriate IP address, if you wish to change this field.
Default: 10.0.0.188
Net Mask
The RIM-1000 is shipped with a default Subnet Mask of 255.255.255.0. Contact
your IT department for an appropriate Subnet Mask, if you wish to change this
field.
Default: 255.255.255.0
Def Route
The RIM-1000 is shipped with a default Gateway Route of 10.0.0.1. Contact your
IT department for an appropriate Gateway Route, if you wish to change this field.
Default: 10.0.0.1