Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 162)

Remote Infrastructure Management System - Version 1.0 / July 2014
162 www.chatsworth.com
IMPORTANT: Do not change the name of the firmware file when you save it. Otherwise, the RIM-1000 will not recognize the file.
3. On the RIM-1000 web interface, go to Configuration>Flash Program.
Figure 8.1 Flash Program Configuration Page
4. Click the Choose File or Browse button.
5. Locate and choose the firmware file (.bin) that you saved from the RLE website.
The path and name of the firmware file (.bin) displays in the field to the left of the Browse button.
Figure 8.2 Choose the Firmware File