Chatsworth Products Remote Infrastructure Management (RIM-1000) - Manual (Page 14)

Remote Infrastructure Management System - Version 1.0 / July 2014
14 www.chatsworth.com
5 EIA-232 Interface 151
Table 5.1 EIA-232 Main Menu 152
Table 5.2 Main Configuration Menu Options (SC) 153
Table 5.3 IP Configuration Menu 154
6 Remote Access 157
7 Point-to-Point Protocol 159
8 Load Firmware and Configuration Data 161
A RIM-1000 Expansion Cards 169
Table A.1 Expansion Card Descriptions 169
Table A.2 SW2 DIP Switch Settings for Expansion Card Slots 171
B Analog Averaging 177
C Analog Input 4-20mA Reference Chart 179
Table C.1 Analog Input 4-20mA Reference Chart 179
D RIM-1000 Accessories Wiring 181
E Alarm ID Reference Tables 189
Table E.1 Analog Alarm ID Reference Table – Inputs 1 through 8 189
Table E.2 Analog Alarm Reference Table – Input Slots 1 and 2 190
Table E.3 Analog Alarm Reference Table – Input Slots 3 and 4 191
Table E.4 Digital Alarm ID Reference Table – Digital Inputs 1 through 8 193
Table E.5 Digital Alarm ID Reference Table – Digital Input Slots 1 and 2 194
Table E.6 Digital Alarm ID Reference Table – Digital Input Slots 3 and 4 195
F RIM-1000 Slot Designations 197
Table F.1 Input Slot Designation Table – Slot 0 197
Table F.2 Input Slot Designation Table – Slot 1 198
Table F.3 Input Slot Designation Table – Slot 2 199
Table F.4 Input Slot Designation Table – Slot 3 199
Table F.5 Input Slot Designation Table – Slot 4 200
Table F.6 Output (Relays) Slot Designation Table – Slots 0 and 1 201
Table F.7 Output (Relays) Slot Designation Table – Slots 2 and 3 201
Table F.8 Output (Relays) Slot Designation Table – Slot 4 202
G Relay Control Logic 203
H SNMP v3 207
Table H.1 SNMP v3 Trap Settings 208
Table H.2 Trap Destination Settings 208
Table H.3 SNMP v3 Profile Settings 209
I Technical Specifications 211
Table I.1 Technical Specifications 211