HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 79)

Virtual Connect networks 79
Task Action
Delete a network access group Click the network access group name, and then click Delete. You cannot
delete the Default network access group.
Define Network Access Group screen
To access this screen, click Add at the bottom of the Network Access Groups screen (on page 77 ), or select
Network Access Groups from the Define pull-down menu.
To add a network access group:
1. Enter a name for the network access group in the Network Access Group Name field. The name can
consist of up to 64 alphanumeric characters, including the hyphen (-), underscore (_), and period (.).
2. To filter the list of available networks:
o On the Alphabetic tab, click a letter to show only network names that begin with that group of
letters, or click All to show all networks alphabetically.
o On the Filter tab, use the pull-down menus to select the networks you want to view, and then click
Go.
3. Drag and drop the networks that should be included as members of the network access group from the
Excluded Networks field to the Included Networks field.
4. Click Apply.
Edit Network Access Group screen
To access this screen: