HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 180)

Virtual Connect modules 180
The table on this screen lists all of the Ethernet stacking links found within the Virtual Connect domain. Each
row of the table identifies the link speed and the connections on both sides of the link, identified by the
module and port number.
Port X0 indicates the 10Gb port connected through the midplane of horizontally-adjacent VC-Enet modules.
Ports X7 and X8 connect to the internal link between horizontally-adjacent Flex-10 enabled VC-Enet modules.
NOTE: Virtual Connect does not support stacking for FC modules, so each VC-FC module
requires uplink connections to the external FC SAN environment.
For more information on connecting stacking links, and stacking links in a multi-enclosure environment, see
the HP Virtual Connect for c-Class BladeSystem Setup and Installation Guide on the Installing tab of the HP
BladeSystem Technical Resources website ( http://www.hp.com/go/bladesystem/documentation ).
Enclosure Information screen
The following table describes the rows within the Enclosure Information screen.
Row Description
Part Number The part number to be used when ordering an additional enclosure of this type
Product Name The common descriptive name of the enclosure
Serial Number The unique serial number of the enclosure
Asset Tag If configured, the asset tag of the enclosure, used for inventory control
Manufacturer Name of the enclosure manufacturer
Spare Part Number The part number to be used when ordering a replacement enclosure
Rack Name Name of the enclosure rack (assigned through the Onboard Administrator)
Time Zone The time zone assigned to the enclosure