HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 28)

Virtual Connect domains 28
Column Description
IP address iSCSI storage management IPv4 address
Username An administrator for the storage management
Action Perform edit and delete operations
The following table describes the available actions in the Domain Settings (Storage Management
Credentials) screen. Clicking another link in the pull-down menu or left navigation tree causes current edits
that have not been applied to be lost.
Task Action
Add a credential (" Adding or
editing a credential " on page 28 )
Click Add below the table, or right-click inside the table, and then select
Add.
Edit a credential (" Adding or
editing a credential " on page 28 )
Click the Edit link in the Action column, or left-click on the credential row,
right-click to display a menu, and then select Edit.
Delete a credential Click the Delete link in the Action column, or left-click on the credential
row, right-click to display a menu, and then select Delete.
Adding or editing a credential
Use this screen to add a storage management credential.
To add a credential:
1. Enter a name for the iSCSI storage management in the Name field.
2. Enter the IPv4 address for the iSCSI storage management in the IP address field.
3. Enter an administrator user name for the storage management in the Username field.