HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 161)

Virtual Connect server profiles 161
Column name Description
Allocated Bandwidth Allocated bandwidth of the port. See "Bandwidth assignment (on page
131 )."
Boot Setting Enables or disables offload or boot on the network connection. Valid values
are DISABLED, PRIMARY, (SECONDARY), and USE-BIOS. For more
information, see "Creating iSCSI connections (on page
144 )." After selecting
an option, you must click outside the grid to complete the selection. This is the
same procedure that is followed when selecting a fabric or network for an FC
or Ethernet connection, respectively. Once the Boot Setting column has been
completed, you can then edit the Target Port Name and LUN.
MAC The MAC address assigned to the port, or "Server Factory Default" if not
using VC-assigned MAC addresses
Mapping Server hardware mapping assignment. See "iSCSI and FCoE port
assignments (on page
130 )."
Action Delete a connection. Connections can be removed starting with the last
connection in the list.
FC HBA Connections
Port Relative order of the Fibre Channel port on the server receiving the profile
Connected to Bay number of the VC-FC module to which the port is connected
FC SAN Name Name of the SAN fabric to which the port is connected, or Unassigned
Status Status of the Fibre Channel module
Port speed Speed of the VC-FC module port connected to the port
WWPN The World Wide Port Name assigned to the port, or "Server Factory Default"
if not using VC-assigned MAC addresses
Action Delete a connection. Connections can be removed starting with the last
connection in the list.
FCoE HBA Connections
Port Relative order of the FCoE port on the server receiving the profile
Connected to Bay number of the VC module to which the port is connected
FC SAN Name
Name of the SAN fabric to which the port is connected, or Unassigned
Status Status of the VC module
Port Speed Speed of the VC module port connected to the port
Allocated Bandwidth Allocated bandwidth of the port. See "Bandwidth assignment (on page
131 )."
WWPN The World Wide Port Name assigned to the port, or "Server Factory Default"
if not using VC-assigned MAC addresses
MAC The MAC address assigned to the port, or "Server Factory Default" if not
using VC-assigned MAC addresses
Mapped Server hardware mapping assignment. See "iSCSI and FCoE port
assignments (on page
130 )."
Action
Delete a connection. Connections can be removed starting with the last
connection in the list.
* Only Flex-10 NICs and FlexFabric NICs connected to Flex-10 modules and FlexFabric modules are able to
set the transmit bandwidth allocation. Other parts are restricted to the actual physical speed (1Gb).
The following table describes the available actions in the Edit Server Profile screen. Clicking another link in
the pull-down menu or left navigation tree causes current edits that have not been applied to be lost.