HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 100)

Virtual Connect networks 100
With VC 2.30 and later, a maximum of 128 associated networks is supported in each shared uplink set. In
VC 3.30 and later, this limitation has been removed. There is a limit of 1000 networks per VC domain.
Additionally, the VLAN Capacity (on page
86 ) might place restrictions on the number of networks that can
be added to a shared uplink set.
The following table describes the fields within the Define Shared Uplink Set screen.
Field name Description
Ethernet Shared External Uplink
Set
Uplink Set Name Descriptive name for the shared uplink set. Do not use spaces.
External Uplink Ports
Port Enclosure, bay, and port number
Port Role Displays whether the port is designated as primary or secondary
Port Status Shows the link status, link speed, and connectivity of the port. If the port is
unlinked and no connectivity exists, the cause is displayed. For more
information about possible causes, see "Port status conditions (on page
208 )."
Connector type The type of connector on the port; for example, RJ-45
Connected to If the individual port is connected to a switch that supports LLDP, the switch
MAC address and switch port number appear. A link is provided to obtain
more information about the far-end switch port.
PID PID status icon (illuminated or not illuminated) for the port
Speed/Duplex Pull-down menu to specify the speed and duplex (where applicable) of the
uplink port
Action Perform delete operations
Associated Networks
(VLAN-tagged)