HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 60)

Virtual Connect users and roles 60
Local users can test an LDAP configuration before applying it. For more information, see "Test LDAP
authentication (on page 60 )."
The following table describes the fields within the LDAP Server Settings (LDAP Server) screen.
Field Description
Enable LDAP Authentication Select to enable LDAP authentication.
LDAP Server Address The IP address or the DNS name of the domain of the directory service
LDAP Server SSL Port
The port used for LDAP communications. The default port is port 636.
Search Context 1 First searchable path used to locate the user when you are trying to authenticate
using directory services
Search Context 2 Second searchable path used to locate the user when you are trying to
authenticate using directory services
Search Context 3 Third searchable path used to locate the user when you are trying to authenticate
using directory services
Use Windows NT Account
Name Mapping
(DOMAIN/Username)
Select to use NT account name mapping.
Test LDAP authentication
Local users can test their LDAP configuration before making the configuration active.
To test an LDAP configuration:
1. Be sure that LDAP group settings are configured.
2. Be sure that any LDAP certificates are installed.
3. Access the LDAP Server Settings (LDAP Server) screen.