HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 140)

Virtual Connect server profiles 140
Column name Description
Profile
Profile Name Descriptive name for the server profile. The text can be up to 64
alpha-numeric characters, dashes, and underscores. Do not use spaces.
Network Access Group Associates a network access group to the profile. The default network access
group is "default."
Advanced Profile Settings (on
page
137 )
Select to show if server factory defaults are being used for Ethernet MAC
Addresses, Fibre Channel WWNs, and Serial Numbers.
Ethernet Adapter Connections
Port Relative order of the Ethernet port on the server receiving the profile. System
board NICs are first in the order, followed by NICs on mezzanine cards. See
"iSCSI and FCoE port assignments (on page 130 )" and "Bandwidth
assignment (on page 131 )."
Network Name Unassigned, name of the network, or "Multiple Networks" associated with
this port
Status Displays the current linked status of the selected port
Port Speed The requested operational speed for the server port. Valid values include
"Auto", "Preferred", and "Custom". The default value is "Preferred".
If the speed type is "Auto", the maximum port speed is determined by the
maximum configured speed for the network.
If the speed type is "Preferred", the speed of the network is the same as the
preferred speed of the network to which the connection is associated. If no
preferred speed is configured for a network, it defaults to "Auto".
If the speed type is "Custom", you can configure any speed from 100Mb to
MAX Configured speed for the network in 100-Mb increments.*
PXE Shows whether PXE is enabled, disabled, or USE BIOS is selected on that
port. Only one port can have PXE enabled.
MAC Type of MAC address assignment configured for the Virtual Connect domain
Action Perform delete operations
iSCSI HBA Connections
Port Relative order of the port on the server receiving the profile
Network Name Unassigned or name of the network associated with this port.
Status Displays the current linked status of the selected port
Port Speed The requested operational speed for the server port. Valid values include
"Auto", "Preferred", and "Custom". The default value is "Preferred".
If the speed type is "Auto", the maximum port speed is determined by the
maximum configured speed for the network.
If the speed type is "Preferred", the speed of the network is the same as the
preferred speed of the network to which the connection is associated. If no
preferred speed is configured for a network, it defaults to "Auto".
If the speed type is "Custom", you can configure any speed from 100Mb to
MAX Configured speed for the network in 100-Mb increments.*
Boot Setting Enables or disables offload or boot on the network connection. Valid values
are DISABLED, PRIMARY, (SECONDARY), and USE-BIOS. For more
information, see "Creating iSCSI connections (on page
144 )." After selecting
an option, you must click outside the grid to complete the selection.
MAC Type of MAC address assignment configured for the Virtual Connect domain
Action Perform delete operations
FC HBA Connections