HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 55)

Virtual Connect users and roles 55
Local Users screen
The first time this screen appears, the Administrator account, which has all administrative privileges, might be
the only user listed. The Administrator account cannot be deleted or have domain privileges removed.
However, the Administrator password can be changed, and the network, server, and storage privileges can
be removed. The default Administrator password is identified on the Default Network Settings label on the
primary VC module.
To reset the Administrator password to the factory default, see the information on resetting the administrator
password and DNS settings in the HP Virtual Connect for c-Class BladeSystem Setup and Installation Guide
on the Installing tab of the HP BladeSystem Technical Resources website
(
http://www.hp.com/go/bladesystem/documentation ).
The following tasks can be performed on this screen:
• To create a new local user account, click Add User. The User Settings screen appears.
• To edit attributes of a defined local account, select the user name from this screen.
• To delete a user account, click the Delete icon for that line item, and then click Apply.
• To enable strong passwords or enable local users, click Advanced.
• To edit the delete confirmation preference, click Advanced, select or clear Auto Populate Name During
Delete Confirmation, and then click Apply.