HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 151)

Virtual Connect server profiles 151
• Default TCP Port and Mutual CHAP:
iscsi:”192.168.0.2”::”000000000000000E”:”iqn.2009-4.com:1234567890”::”E”
:”D”:”M”
o Target IP address: 192.168.0.2
o Target TCP port: Use default from RFC 3720 (3260)
o Target boot LUN: 0x0E
o Target iqn name: iqn.2009-04.com:1234567890
o Initiator name: Not specified. Use the Initiator name already configured. Use the default name if
none was configured.
o Header Digest: Enabled
o Data digest: Data Digest disabled
o Authentication Type: Mutual CHAP
Define Server Profile screen (multiple enclosures)
When defining server profiles in a multi-enclosure configuration, profiles can be assigned to server bays in
any of the enclosures that have been added and imported into the domain.
Multiple network connections for a server port
Server port connections to virtual networks are defined on the Define Server Profile screen (on page 138 ).
Each server port can be connected to multiple virtual networks, each using a unique server VLAN ID for virtual
network mapping.