HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 65)

Virtual Connect users and roles 65
system access must be configured on the RADIUS server side prior to enabling this feature in VCM.
Configuration changes made on this screen do not update the RADIUS server.
Users with domain privileges can test a RADIUS configuration before applying it. For more information, see
"Test RADIUS authentication (on page 67 )."
The following table describes the fields within the RADIUS Settings (RADIUS Server) screen.
Field Description
Enable RADIUS
Authentication Select to enable RADIUS authentication.
Server Address
The IP address or the DNS name of the RADIUS server used for authentication
Server SSL Port The server UDP port number. Valid values include a valid port number between 1
and 65535. The default port is 1812.
Server Timeout The time in seconds that VCM should wait before timing out the request. If the
primary server times out and a secondary server is configured, VCM attempts the
request on the secondary server. If the secondary server times out, the request
fails. The valid range of values is from 1 to 600 seconds. The default timeout is 10
seconds.
Server Key A shared secret text string to be used for encrypting user details. This string must
match between VCM and the RADIUS server. The secret-key is a plain text string
of 1 to 128 characters.
Add/Remove Secondary
Server
Select to add or remove a secondary RADIUS server.
To add a secondary server, select the Add/Remove Secondary Server checkbox to display the Secondary
Server Parameters, complete the fields as described in the table above, and then click Apply. The secondary
server is queried only if the primary server is down or the request to the primary server times out.
To remove a secondary server, clear the Add/Remove Secondary Server checkbox, and then click Apply.