HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 167)

Virtual Connect server profiles 167
d. In the FCoE HBA Connections section, click the Unassigned FC SAN Name for the bay you used
when you created the SAN fabric in step 2, and then select the SAN fabric you created from the
pull-down list.
e. In the Assign Profile to Server Bay section, select the bay for the HP ProLiant BL680c G7 Server
Blade to which you want to assign the server profile from the Unassigned Server pull-down list.
f. Click Apply.