HP 1.10GB Virtual Connect Ethernet Module for c-Class BladeSystem - Manual (Page 224)

Glossary 224
Glossary
external port
The Ethernet connectors (10GBASE-CX4 and RJ45) on the faceplate of the VC-Enet module labeled as ports
1-8, X1, and X2.
FlexNIC
Using a Flex-10 capable NIC with an HP VC Flex-10 or FlexFabric module provides the ability to divide a
10Gb NIC into four FlexNICs with configurable bandwidth.
shared server links
A feature that enables each server link to be shared among multiple networks with the use of VLAN tagging.
shared uplink port
An Ethernet uplink port that carries the traffic for multiple Virtual Connect networks. Each associated Virtual
Connect network is mapped to a specific VLAN on the external connection and appropriate VLAN tags are
removed or added as Ethernet packets enter or leave the Virtual Connect domain.
shared uplink port set
A set of Ethernet uplinks that are used together to provide improved throughput and availability to a group
of associated Virtual Connect networks. Each associated Virtual Connect network is mapped to a specific
VLAN on the external connection and appropriate VLAN tags are removed or added as Ethernet packets
enter or leave the Virtual Connect domain.
Smart Link
A feature that, when enabled, configures a Virtual Connect network so that if all external uplinks lose link to
external switches, Virtual Connect will drop the Ethernet link on all local server blade Ethernet ports
connected to that network.
stacking port
A VC-Enet module external port used to connect to other VC-Enet modules within an active Virtual Connect
domain. Stacking ports are automatically identified by the VC-Enet modules. The port number (port ID) is lit
amber.
uplink port
An external port that is configured within Virtual Connect for use as a connection to external networking
equipment. Uplink ports are defined within Virtual Connect by the enclosure name, interconnect bay
containing the module, and the port number. The port number (port ID) for uplink ports is lit green.