Delete ospf redistribute, Disable ospf debug, Enable ospf debug – Allied Telesis RAPIER I User Manual
Page 96
96
Open Shortest Path First Enhancements
Release Note
Software Version 2.8.1
C613-10477-00 REV B
Adding a BGP, RIP, or static route redistribution definition will change the
setting of the bgpimport, rip, and staticexport parameters of the
. If you configure a BGP route filter using the bgpfilter
parameter of the
command, the filter will be applied before any BGP
route redistribution definition.
delete ospf redistribute
Syntax
DELete OSPF REDistribute
PROTocol={BGP|INTerface|RIP|STAtic}
Description
The modified protocol parameter specifies the route redistribution definition
to delete. OSPF no longer imports and redistributes routes from the protocol.
Specify bgp or rip to delete the redistribution definition for BGP or RIP routes,
respectively. Specify interface to delete the redistribution definition for
non-OSPF interface routes. Specify static to delete the redistribution definition
for statically configured routes.
Deleting a BGP, RIP, or static interface route redistribution definition will
change the setting of the bgpimport, rip, and staticexport parameters of the
.
disable ospf debug
Syntax
DISable OSPF
DEBug={ALL|IFSTate|NBRSTate|PACket|REDistribute|SPF|STA
te}
Description
The modified debug parameter specifies the debugging options to disable. If
all
is specified, all debugging options are disabled. If ifstate is specified,
interface state debugging is disabled. If nbrstate is specified, neighbour state
debugging is disabled. If packet is specified, OSPF packet debugging is
disabled. If redistribute is specified, route redistribution debugging is
disabled. If spf is specified, debugging for the Shortest Path First routing
calculations are disabled. If state is specified, both interface and neighbour
state debugging are disabled.
enable ospf debug
Syntax
ENAble OSPF
DEBug={ALL|IFSTate|NBRSTate|PACket|REDistribute|SPF|STA
te} [DETail={BRIef|HEADer|LSAFull|LSASummary}]
[TIMEOut={NONE|1..2400}]
Description
The modified debug parameter specifies the debugging options to enable. If all
is specified, all debug options are enabled. If ifstate is specified, interface state
debugging is enabled. If nbrstate is specified, neighbour state debugging is
enabled. Output from ifstate and nbrstate includes the interface or neighbour
the state change relates to, the event that caused the state change, and the
previous and current states of the interface or neighbour. If packet is specified,
OSPF packet debugging is enabled. The level of detail shown in packet