beautypg.com

Trunk group, Enhanced static arp entry filtering on, Ports within a trunk group – Allied Telesis RAPIER I User Manual

Page 70: Command changes

background image

70

Internet Protocol (IP) Enhancements

Release Note

Software Version 2.8.1
C613-10477-00 REV B

For an example of how to use ARP entries with multicast MAC addresses, see
Guideline to Windows 2003 Network Load Balancing Clustering with Allied Telesyn
Switches
. This is available from the Resource Center on your Documentation
and Tools CD-ROM, or from:

www.alliedtelesis.co.uk/en-gb/solutions/techdocs.asp?area=howto

Command Changes

The following table summarises the new and modified commands:

Enhanced Static ARP Entry Filtering on Ports within a
Trunk Group

This Software Version ensures that traffic flow is not interrupted when a port
within a trunk group goes link-down.

In previous Software Versions, when a port that is part of a trunk group goes
link-down, the router or switch drops any traffic that is forwarded by a static
ARP entry out of that port.

In this Software Version, when a port that is part of a trunk group goes
link-down, the router or switch modifies any static ARP entries defined to
forward traffic out of that port. It modifies the egress port for the static ARP
entry to a port which is link-up within the trunk group. This ensures that traffic
can flow without interruption despite the original port going link-down.

Command Changes

This expansion does not affect any commands.

Command

Change

disable ip macdisparity

New command.

enable ip macdisparity

New command.

show ip

New IP/MAC address disparity parameter.

This manual is related to the following products: