Allied Telesis RAPIER I - Manual (Page 48)

48 PPPoE Access Concentrator Release Note
Software Version 2.8.1
C613-10477-00 REV B
delete ppp acservice
Syntax DELete PPP ACservice=service-name
[ACINTerface={NONE|interface}]
where:
■ interface is an interface name formed by concatenating an interface type
and an interface instance (e.g. eth0). Valid interface types are ETH and
VLAN.
Description This command deletes a PPP over Ethernet Access Concentrator service from
the router or switch. Note that it is not possible to delete a service that is
currently in use.
The acinterface parameter specifies the interface on which the service is
offered. This parameter is used to further identify the service to delete, as it is
possible to have two or more services with the same name, but which are
offered on different interfaces:
■ If you specify an interface, it is on that interface that the service with the
specified name is deleted.
■ If you specify none, the service offered on the Ethernet port is deleted if it
was added with acinterface=none specified in the add ppp acservice
command.
If multiple interfaces exist for the service, you are prompted to specify an
acinterface
. The default is none.
The acinterface parameter supercedes the now deprecated vlan parameter in
this command.
set ppp acservice
Syntax SET PPP ACservice=service-name [ACRadius={OFF|ON}]
[MAXSessions=1...512] [TEMPlate=ppp-template]
[ACINTerface={NONE|interface}]
Where:
■ interface is an interface name formed by concatenating an interface type
and an interface instance (e.g. eth0). Valid interface types are ETH and
VLAN.
Description This command sets the parameters associated with the specified PPPoE Access
Concentrator service.
The acinterface parameter specifies the interface on which the service is
offered. This parameter further identifies the service whose parameters are to
be changed, as it is possible to have two or more services with the same name
but offered on different interfaces. It is not possible to change the interface on
which the service is offered.
■ If an interface is specified, the service with the specified name on that
interface has its parameters changed.
■ If none is specified, the service offered on the Ethernet ports has its
parameters changed.