Allied Telesis RAPIER I - Manual (Page 19)

Software Version 2.8.1 19
Software Version 2.8.1
C613-10477-00 REV B
set command assignmentoperator
Syntax SET COMmand {ASSignmentoperator=[Equals|SPaceorequals]}
Description This new command sets the assignment operator of the command parser
thereby defining the format of the command syntax for the CLI.
The following commands have the same effect. Note that the first one is clearer
because of the = sign.
add ip rou=172.16.9.0 mask=255.255.255.0 int=vlan1
next=172.16.8.82 met=1
add ip rou 172.16.9.0 mask 255.255.255.0 int vlan1 next
172.16.8.82 met 1
Take care when using aliases because they match any whole word on the
command line. Therefore, if you separate a parameter with a space, a matching
alias could erroneously be substituted for the value.
Note that certain command handlers, such as those for STT, PERM, and ACC,
always require the = sign.
Example To set the command processor so that you can enter a space between
parameters and values on the command line, use the command:
set com ass=sp
Parameter Description
ASSignmentoperator Defines the operator between parameters when assigning values.
Default: Equals
Equals Requires users to enter = sign. To ensure clarity
and accuracy, we recommend always using the =
sign.
SPaceorequals Lets users enter either the = sign or just leave a
single space between parameters.