Allied Telesis RAPIER I - Manual (Page 117)

Software Version 2.8.1 117
Software Version 2.8.1
C613-10477-00 REV B
Extension to Range of Classifier fields for
x900 Switches
This Software Version introduces the ability to match on more fields of an IPv4
packet. A number of new parameters have been added to Classifier commands
to allow this.
Command Changes
The following table summarises the modified commands:
Command Reference Updates
This section describes the changed portions of modified commands and output
screens. The new parameters and options are shown in bold for modified
commands.
Command Change
create classifier New parameters: macsmask, macdmask, tcpflags,
icmptype, icmpcode, igmptype, eipbyte01 -16.
set classifier New parameters: macsmask, macdmask, tcpflags,
icmptype, icmpcode, igmptype, eipbyte01 -16..
show classifier New input parameters: macsmask, macdmask,
tcpflags, icmptype, icmpcode, igmptype,
eipbyte01 -16.
New output parameters: TCP Flags, ICMP Code,
ICMP Type, TGMP Type, Layer 3 Byte 01 - 16.