Allied Telesis RAPIER I - Manual (Page 109)

Software Version 2.8.1 109
Software Version 2.8.1
C613-10477-00 REV B
set bgp peertemplate
Syntax SET BGP PEERTemplate=1..30 [CLIEnt={NO|YES}]
[CONnectretry={DEFault|0..4294967295}]
[DESCription={NONE|description}]
[HOLdtime={DEFault|0|3..65535}]
[INFilter={NONE|prefixlist-name}]
[INPathfilter={NONE|1..99}]
[INRoutemap={NONE|routemap}]
[KEEpalive={DEFault|1..21845}] [LOCal={NONE|1..15}]
[MAXPREFIX={OFF|1..4294967295}]
[MAXPREFIXAction={Terminate|Warning}]
[MINAsoriginated={DEFault|0..3600}]
[MINRouteadvert={DEFault|0..3600}]
[NEXthopself={NO|YES}]
[OUTFilter={NONE|prefixlist-name}]
[OUTPathfilter={NONE|1..99}]
[OUTRoutemap={NONE|routemap}]
[PRIVateasfilter={NO|YES}] [SENdcommunity={NO|YES}]
Parameter Description
DESCription A description for the peers that use the template, which has no effect
on their operation. The new none option allows you to not specify a
description, or remove a previously specified description.
Default: none.
INRoutemap The route map that filters and/or modifies prefixes from peers that use
the template. The new none option allows you to not specify a route
map, or remove a previously specified route map.
Default: none.
OUTRoutemap The route map that filters and/or modifies prefixes sent to peers that
use this template. The new none option allows you to not specify a
route map, or remove a previously specified route map.
Default: none.