Allied Telesis RAPIER I - Manual (Page 101)

Software Version 2.8.1 101
Software Version 2.8.1
C613-10477-00 REV B
show ospf redistribute
Syntax SHow OSPF REDistribute
Description The output of this command includes new and modified fields.
Figure 28: Example output from the show ospf redistribute command
OSPF Redistribute
Protocol Metric RouteMap Subnet Tag Type Limit/Redistributed
--------------------------------------------------------------------------------
Static 20 - YES 10 Ext2 500/ 201
BGP 20 - NO 20 Ext2 2000/ 1600
Interface Original rmi NO Original Original 1000/ 10
Table 26: New and modified parameters in the output of the show ospf redistribute
command
Parameter Meaning
Protocol The routing source from which OSPF imports the routes for this
redistribution definition; one of “BGP”, “Interface”, “RIP”, or “Static”.
Metric The route metric that OSPF assigns to routes that it redistributes from this
protocol, or “Original” if the original route metric is preserved.
Tag The numeric tag that OSPF uses to label routes that it imports from this
protocol, or “Original” if the original tag is preserved.
Type The OSPF external route type which OSPF assigns to routes that it
redistributes from this protocol; one of “Ext1” (External Type 1), “Ext2”
(External Type 2), or “Original” (original route type is preserved).
Limit The maximum number of routes that OSPF will import and redistribute
from this protocol.
Redistributed The number of routes that OSPF has imported and redistributed from this
protocol.