PreSonus StudioLive 24.4.2 - Manual (Page 87)

6 Capture
6.2 The Session Page
StudioLive ™ Software Library
Reference Manual
83
Fast Forward. Fast Forwards as long as this button is enabled.
Next Marker. Jumps the playback cursor to the next marker.
Back to Beginning. Returns the playback cursor to the beginning of the Session.
Stop. Stops playback.
Play. Starts playback at the current playback-cursor position.
Record. Starts recording at the current playback-cursor position.
Loop. Engages/disengages Loop mode.
Time Display. Displays the time at the current playback-cursor position.
Remaining Time. Displays the remaining time that can be recorded, based
on the size of the available storage left on the hard drive to which you are recording.
Sample Rate Display. Displays the current Capture/StudioLive sample rate.
6.2.2 Meter Bridge
Capture provides input and output metering, depending on whether or not
a track is playing back or being recorded. These peak-style meters feature clip
indicators for each input into Capture from the StudioLive mixer. StudioLive
16.4.2 and 24.4.2 users will see an additional pair of meters for the routable
Master track. (See Section 3.7.1 for details on how to route a bus to this track.)
Link Button. Between each meter you will find a Link button. When this button is
active, Capture will record that track as a stereo-interleaved file. By default, the
routable bus pair (25-26/17-18) is link-enabled, as are the stereo channels on the
StudioLive 16.0.2 (9-10/15-16).
Record Arm Button. Below each meter is the Record Arm button for that track.
When this button is active, Capture is ready to record audio that is routed to the
track.