PreSonus StudioLive 24.4.2 - Manual (Page 50)

3 Universal Control and VSL
3.8 Smaart System Check Wizards (StudioLive 16.4.2 and 24.4.2 only)
StudioLive ™ Software Library
Reference Manual
46
3. Click OK when your microphone is properly placed.
4. Raise the fader until the pink noise output through your speaker is louder than the
ambient noise floor in the room. At the appropriate measurement level, you
should not hear the air conditioning, traffic noise from the street, etc.
5. To mute the pink noise at any time, simply click on the Speaker Icon.
6. Click Analyze to generate the first frequency-response trace.
7. Place your microphone off-axis in front of the same speaker.
See Section 3.8.5 for tips in choosing the best secondary mic
positions.
8. Click OK when your microphone is properly placed.
9. Click Analyze to generate the second frequency-response trace.
10. Place your microphone in a different off-axis position in front
of the same speaker. See Section 3.8.5 for tips in choosing the
best secondary mic positions.
11. Click OK when your microphone is properly placed.
2
3