PreSonus StudioLive 24.4.2 - Manual (Page 115)

7 Studio One Artist Quick Start
7.2 Configuring MIDI Devices
StudioLive ™ Software Library
Reference Manual
111
In the Audio Device menu, select “PreSonus FireStudio.”
Click the Apply button and then OK.
After you have verified that the PreSonus FireStudio driver has been
detected (remember: StudioLive shares a driver with the PreSonus
FireStudio family of interfaces), please continue to the next section
to set up your external MIDI devices. If you do not have any MIDI
devices to connect at this time, please skip to Section 7.3.
7.2 Configuring MIDI Devices
From the External Devices window in Studio One Artist, you can configure your
MIDI keyboard controller, sound modules, and control surfaces. This section
will guide you through setting up your MIDI keyboard controller and sound
module. Please consult the Reference Manual located on your Studio One Artist
installation DVD for complete setup instructions for other MIDI devices.
If you are using a third-party MIDI interface or USB MIDI-controller
keyboard, you must install the drivers for these devices before
beginning this section. Please consult the documentation that came
with your MIDI hardware for complete installation instructions.
7.2.1 Setting Up an External MIDI Keyboard Controller from the Start Page
A MIDI keyboard controller is a hardware device that is generally used for playing
and controlling other MIDI devices, virtual instruments, and software parameters.
In Studio One Artist, these devices are referred to as Keyboards, and they must be
configured before they are available for use. In some cases, your MIDI keyboard
controller is also used as a tone generator. Studio One Artist views the controller
and tone-generation functions as two different devices: a MIDI keyboard controller
and a sound module. The MIDI controls (keyboard, knobs, faders, etc.) will be
set up as a Keyboard. The sound module will be set up as an Instrument.
You can set up your external MIDI devices from the Setup area
in the Start page. Before setting up a new Song for recording,
take a moment to configure external devices.
On
100 - 240 VAC 50-60Hz
Left
Righ t