PreSonus StudioLive 24.4.2 - Manual (Page 52)

3 Universal Control and VSL
3.8 Smaart System Check Wizards (StudioLive 16.4.2 and 24.4.2 only)
StudioLive ™ Software Library
Reference Manual
48
I just wanted to mix sound......
I didn’t know there’d be math
2
5
x-15 =
5
8
x-16
2
5
x-15+16 =
5
8
x-16+15
2
5
x-
5
8
x=
5
8
x-
5
8
x-1
2
5
5
8
x( - )=-1
2 8
5 8
5 8
8 8
x( - )=-1
*Special thanks to our friends at www.roadie.net for the use of this awesome cartoon.
The SSD Wizard is an automated process that calculates and sets the correct
delay time between two full-range systems. The purpose of this wizard is to
set the delay time for a secondary system that is being fed from one or more
subgroups. No calculators, slide rules, or finger-counting are necessary!
In the above example, you see three sets of speakers: main front-of-house,
sidefills for the middle of the room, and rear fills for the back. As a general
rule, you should set the delay on a satellite system based on its distance
from the next closest system to the mains. In this case, you’ll set the delay
on the sidefills based on their distance from the main front-of-house system
and the delay for the rear fills based on their distance from the sidefills.
STAGE
FOH L FOH R
Side Fill
(left)
Side Fill
(right)
Rear Fill
(left)
Rear Fill
(right)
30 Feet
40 Feet
37 Feet
inconveniently positioned column
30 Feet