PreSonus StudioLive 24.4.2 - Manual (Page 127)

7 Studio One Artist Quick Start
7.5 Creating MIDI Tracks
StudioLive ™ Software Library
Reference Manual
123
10. MIDI data does not contain audio signals. To hear your sound module,
you must connect the audio output of the sound module to a StudioLive
input, then connect the StudioLive’s audio outputs to a sound system.
(You also can listen on headphones, using the headphone output.)
When you are ready to mix your Song, you must convert the recorded
MIDI data to an audio waveform by recording a new audio track.
7.5.1 Remote Controlling Your StudioLive 16.0.2 with Studio One
The StudioLive 16.0.2’s MIDI Control mode enables you to MIDI-control
several features on your mixer from a DAW or other MIDI source. When
controlling the mixer from a DAW, you don’t need to worry about
connecting an external MIDI interface because the StudioLive 16.0.2
can receive MIDI control messages over its FireWire connection.
These setup instructions will enable you to quickly configure
Studio One Artist to control your StudioLive, while giving you the
information necessary for you to create a custom configuration.
You must first set up your StudioLive for MIDI control, so navigate to pages 4 and 5
of your StudioLive system menu and set each page up as shown in these images:
On
100 - 240 VAC 50-60Hz
Left
Righ t