PreSonus StudioLive 24.4.2 - Manual (Page 10)

2 Connecting to a Computer
2.2 Installation for Mac OS X
StudioLive ™ Software Library
Reference Manual
6
2.2 Installation for Mac OS X
The Universal Control Installer will take you through each step of the installation
process. Please read each message carefully, and be especially careful that you do not
connect your StudioLive too soon.
1. After launching the installer, you will be directed to the Welcome screen.
2. Click “Continue” and follow the onscreen instructions.
3. You will be directed to choose the hard drive onto which you want to install the
StudioLive driver and Universal Control with VSL. You must choose your system
drive. Storage drives and partitions cannot be used as hosts for the driver.
4. When the installation is completed, you will be prompted to reboot your
computer. After your Mac has restarted, connect your StudioLive with a FireWire
cable and power it on.
5. Once the installation is completed, you will find the Universal Control program in
your Applications folder. It is recommended that you place this in your Dock.
You are now ready to use your StudioLive!